|
Services - Filling Analysis
EPS FloTek will perform Filling analysis to optimize the part design, part quality and process, and select the right material before expensive tooling costs are incurred. Our services include filling analysis in both Shell and Solid modules depending on your part geometry. Our capabilities include standard injection molding, gas assisted injection molding, thermoset injection molding and insert molding. Your part is carefully reviewed and detailed analyses through several iterations are run till the possible defects are eliminated. An in-depth review of the analysis results, investigation of effects of various parameters and experience with thousands of flow analysis simulations helps us to predict many possible problems even if analysis cannot show directly and an optimum solution for your products is recommended. There are numerous benefits incurred using Filling analysis and some of them are listed below:
• Balance & Size Runners and gates
• Gate #, Size and Location
• Predict fill pattern
• Predict Short shots
• Reduce scrap
• Balance filling and pressure distribution
• Optimize process conditions
• Material Selection
• Predict Sprue pressure
• Determine Clamp Tonnage
• Predict Temperature
• Determine Fiber orientation
• Identify Weld Line Location
• Identify Gas Trap Location
• Identify Shear Stress Levels | 
